Zhou Xiaoying

Water-based Thick Plate Product Manual
Contact Miss Zhou
Water-based Thick Plate Instruction Manual
Applicable Industries
This product is a printing water-based slurry, suitable for clothing printing.
Appearance and composition
Viscous paste, composed of high molecular polymer emulsion and pigment.
Features
Fast and thick, ordinary screen printing with millimeter height only takes ~ one time
Good fastness, soft feel, non-sticky. Handprint machine printing does not block the plate
Application reference
Darker color
Lighter color

~

~

~

~
Color Paste

Color Paste

Use hard objects to pad the four corners of the screen. The distance is about ~ meters, then it can be dried naturally for an hour and it can withstand high temperature washing for an hour.
Troubleshooting
Poor firmness may be caused by one possibility
The cloth is not cotton, the cloth surface is relatively smooth, or there is too much soft silicone oil remaining on the cloth surface
Guidelines added ~Catalyst is enough
There is too much lint
When printing the first plate, use a hard knife to print ~ (it is best to use a hard square knife. You can also use an iron to flatten the lint or use a primer before printing. White glue or other colors.
The weather is humid and the glue surface is not fully dry
Refer to the guide for baking minutes.
The amount of color paste added exceeds the above
Guide to increase the amount to reduce the color The proportion of slurry dosage (if it can be used alone to make it black).
Start baking at high temperature when the slurry layer is not dry.
Instructions: Wait until the slurry layer is naturally dry and dry before baking. (Explain that the slurry layer is not dry yet. Starting to bake can easily cause bubbling, causing separation between the slurry layers)
When none of the above situations exist, what is the solution if the firmness still does not meet the requirements?
Guidelines for adding ~ catalyst It can increase the firmness ~ times
What are the causes of insufficient elasticity?
The amount of color paste added exceeds the above limit
It is recommended to increase the amount to reduce the proportion of color paste.
It is recommended that the increased weight can significantly improve the elasticity of the slurry.
If the fabric grain is too deep, the fabric itself will be extremely elastic
It is recommended to use a secondary primer first, and then print with a knife each time, and then print or other colors.< br/> Adding too much catalyst
Guidelines for proper control of the amount of catalyst. As long as the firmness meets the requirements, do not increase the amount of catalyst.
Water-based three-dimensional thick plate slurry
/three-dimensional slurry/ The only partner in the washed thick board pulp/right angle thick board pulp industry, the Shanghai World Expo partner, the first brand in the printing industry, Guangyin Brand